Aircraft Ground Power Unit for Sale Maintenance and Calibration Tips
The Ground Power Unit (GPU) is high-end equipment capable of supplying power to aircraft parked on the ground and is required for regular maintenance and frequent calibration. But there comes a time when GPU equipment also requires proper maintenance and care. In order to ensure that all the areas are addressed properly during scheduled maintenance and calibration, we have created a short maintenance guide. So if you are planning to perform a GPU inspection, do not forget to pay attention to the following components:
#1 GPUs COOLING SYSTEM
It is highly important to make sure that the GPU’s cooling system is working perfectly fine. Otherwise, in case of malfunction, the equipment will get heated up and evidently increases the risk of breaking down. While inspecting the cooling system, make sure to check the following:
• COOLANT LEVEL
• RADIATOR CAP
• COOLING HOSES
• THE CHASSIS
• WHEEL BEARINGS
• TOW BAR
• TIRES
• BRAKES
#2 OTHER AREAS FOR OPTIMAL MAINTENANCE
Another thing you need to consider for GPU maintenance is the Oil Filter and Fuel Filter. The purpose of the oil filter is to eliminate combustion contaminants, carbon deposits or dirt from the engine oil. The fuel filter,on the other hand, pumps the fuel and helps the engine to run smoothly, ensuring that only clean gasoline reaches your engine prior to any particle, impurities or debris. The rules of thumb you need to follow are:
• Replace Dirty Air Filter
• Inspect the Accessory Belt for Cracks and Tightened
• Tighten the intake hoses and exhaust piping.
Once all your repair or inspection are done, calibrating the generators should be your next step in maintaining Ground Power Unit accuracy and proper functionality. Do note down one thing that the generator must be calibrated accurately to ensure that the aircraft is getting the right amount of power. If a high voltage is transferred, the aircraft controller might face anerror or flip.
Hope these points will guide you on how to maintain your GPU. If you are seeking a modern Ground Power Unit for Sale, do stop by at https://jetallgpu.com/
#1 GPUs COOLING SYSTEM
It is highly important to make sure that the GPU’s cooling system is working perfectly fine. Otherwise, in case of malfunction, the equipment will get heated up and evidently increases the risk of breaking down. While inspecting the cooling system, make sure to check the following:
• COOLANT LEVEL
• RADIATOR CAP
• COOLING HOSES
• THE CHASSIS
• WHEEL BEARINGS
• TOW BAR
• TIRES
• BRAKES
#2 OTHER AREAS FOR OPTIMAL MAINTENANCE
Another thing you need to consider for GPU maintenance is the Oil Filter and Fuel Filter. The purpose of the oil filter is to eliminate combustion contaminants, carbon deposits or dirt from the engine oil. The fuel filter,on the other hand, pumps the fuel and helps the engine to run smoothly, ensuring that only clean gasoline reaches your engine prior to any particle, impurities or debris. The rules of thumb you need to follow are:
• Replace Dirty Air Filter
• Inspect the Accessory Belt for Cracks and Tightened
• Tighten the intake hoses and exhaust piping.
Once all your repair or inspection are done, calibrating the generators should be your next step in maintaining Ground Power Unit accuracy and proper functionality. Do note down one thing that the generator must be calibrated accurately to ensure that the aircraft is getting the right amount of power. If a high voltage is transferred, the aircraft controller might face anerror or flip.
Hope these points will guide you on how to maintain your GPU. If you are seeking a modern Ground Power Unit for Sale, do stop by at https://jetallgpu.com/
Comments
Post a Comment